Aqua Mix Sealers Choice Gold Penetrating Tile Sealer

Features

• Premium, no-sheen, natural look, low VOC, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas
• NEW Rapid Cure Formula protects in less than 4 hours and is designed to achieve optimal penetration into dense, low-porosity surfaces
• It may also be used as a pre-grouting sealer over clean stone surfaces a minimum of 1 hour prior to grouting
• Use on all natural stone (such as marble, granite, slate, travertine, and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired
• Not recommended for use with composite or engineered stone
• Expected wear is up to 15 years. Extreme weather conditions, harsh cleaning methods, and high-alkaline or solvent-based cleaners will affect wear
• Effective for interior and exterior applications
• Coverage: Approximately 300 to 1,500 sq. ft. per coat per gallon, depending on the type of stone, porosity, and texture of surface, temperature, humidity, and method of application

Tile and Stone Sealer Application

• For new installations, sealer can be applied as soon as 48 hours after grouting
• The surface must be clean, dry, and free of existing sealers or coatings
• Apply using a sponge, brush, paint pad, cotton towel, or sprayer
• Be sure any sealer that does not penetrate the surface is removed from the surface within 5 minutes of each application using absorbent paper or cotton towels
• If 2 or more coats are applied, allow a minimum of 30 minutes of drying time between coats
• 2 hours after the final coat, conduct a test to determine if the surface is completely sealed by applying water droplets to the surface
• If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test
• Ready for surface traffic in 2 hours after final coat
• Keep the area dry for 12 hours; achieve a full cure in 24 hours
• Clean applicator tools with water after each use
• Pre-Grouting application: apply over clean stone or tile a minimum of 2 hours prior to grouting; follow the application procedures above
• Slip clutch
• Thermal overload switch
• Electronic torque limitation and speed control
• Built-in water swivel
• Ground Fault Interrupter
• 5/8" x 11 UNC and 1-1/4" x 7 UNC connecting threads
• Diamond drill bit not included

What's Included?

• Eibenstock ETN 2001P 2-Speed Hand Held Wet Core Drill
• 5/8"-11 and 1-1/4"-7 Threaded Adapter
• Carrying Case
• Operator's manual